-----Original Message-----
From: Dan Langille <dan.langille@dvl-software.com>
To: adsl@freebsddiary.cx <adsl@freebsddiary.cx>
Date: Friday, August 06, 1999 09:57
Subject: pinhole range mapping

>Well, I've just converted my pinholes over. And
>basically, it's all open straight into my firewall.
>Thanks.

Hi,

I am striking the same problems as J. After putting in the range of
pinholes I am not able to connect to the Internet anymore.
The status shows the following

status

Terminal shell v1.0
Nokia M10 multiport ADSL router / bridge
Running Nokia M10 software version 5.1.3 (build R2)
( completed login: user administrator level)
Serial number J1990601758 , CPU MPC860SAR, firmware 2.2
Product ID T66160.09 A
Error logger message counts:
  Low 0, Medium 0, High 47, Warning 35, Lost 0, Total 82
Boot state: running in dram
Uptime 00:00:06:09

Looks like the latest upgrade?

The log looks ok except for this entry:

00:00:00:00 L4 XDSL: port for service id (2) not initialized
00:00:00:00 L4 cb05 [SYS_DrvrStatusComp] Status request error for svc: XDSL.
00:00:00:00 L4 All services initialized, starting Scheduler

I tried to power down for 5 min a few times and this did not fix the
problem.
After deleting the pinhole entries all was fine again.

And yes, Dan the pinhole entries looked like that.

Anything else I can try?

Thanks

Willem

To unsubscribe: send mail to majordomo@freebsddiary.cx
with "unsubscribe adsl" in the body of the message
Received on Tue Aug 10 13:16:14 1999