Just a few questions, which may or may not have been answered before: -

In quite a few office installations I've done using a 3COM OfficeConnect
firewall, I've disabled NAT on the 3com and let the M10 handle it, question
is, how do I disable NAT on the ADSL unit- I've been through all the menus
via telnet and can't seem to find it.

Secondly, I'm trying to get a PC Anywhere connection going through an ADSL
connection onto a server which is has a Colbat Cube which connects the DSL
to the LAN.
I've created pinholes on the M10 for ports 5361 and 5362 (TCP/UDP), to the
servers IP I'm trying to connect to (that is 192.168.0.29).
The Colbat Cube appears to have simply two network cards in it and runs a
variant of Linux. IP of the M10 is 192.168.1.254 (standard), the cube's
primary NIC is 192.168.1.253 (connected to the DSL), the secondary is
192.168.0.1 (being connected to the HUB for the LAN). The cube has an option
'ip forwarding enabled' and also has NAT enabled.
I can't for the life of me get it to work- any suggestions?

TIA

-Dan

To unsubscribe: send mail to majordomo@freebsddiary.cx
with "unsubscribe adsl" in the body of the message
Received on Sat Apr 1 20:52:58 2000