New Zealand ADSL Mailing List


RE: M10 auto restarting itself?!

From: Lightspeedius_at_xtra.co.nz
Date: Mon Sep 11 14:21:31 2000
Message-Id: <20000911022255.YXZT700.mta1-rme.xtra.co.nz@smtp.xtra.co.nz>

I don't know a heap about xDSL modems, but a couple of weeks ago I think I had a similar problem, where I would be playing a game of good ole quake3 and I'd get disconnected, and the modem would try to re-synch itself (or whatever), then it'd be fine.
It happened a few times, and I was gonna contact xtra/telecom cause I was gettin' real cheesed off, but it hasn't happened since, so I didn't worry about it.

I dunno if it's related to your problem or not, but oh well.

>
>From: Michael Bordignon <michael.b@infometrics.co.nz>
>Date: Mon, 11 Sep 2000 14:02:06 +1200
>To: "'kevin@bwpl.co.nz'" <kevin@bwpl.co.nz>,
> "ADSL List (E-mail)"
> <adsl@unixathome.org>
>Subject: RE: M10 auto restarting itself?!
>
>there was this: (maybe a form of DoS?)
>
>46:05:46:01 L4 PPP: (vcc1) too many dropped echo requests, closing
>connection
>46:05:46:01 L3 IPCP: (vcc1) PPP protocol down
>46:05:46:06 L3 PPP: (vcc1) restart timer expired
>46:05:46:06 L4 PPP: (vcc1) disconnecting link layer
>46:05:46:06 L3 PPP: (vcc1) Port listening for incoming PPP connection
>requests
>46:05:46:07 L3 PPP: (vcc1) Establishing Link on permanent connection
>service
>46:05:46:37 L3 PPP: (vcc1) restart timer expired
>46:05:46:37 L3 PPP: (vcc1) No config requests or responses received
>from peer during negotiation
>46:05:46:37 L4 PPP: (vcc1) disconnecting link layer
>46:05:46:37 L3 PPP: (vcc1) Port listening for incoming PPP connection
>requests
>46:05:46:38 L3 PPP: (vcc1) Establishing Link on permanent connection
>service
>46:05:47:08 L3 PPP: (vcc1) restart timer expired
>46:05:47:08 L3 PPP: (vcc1) No config requests or responses received
>from peer during negotiation
>46:05:47:08 L4 PPP: (vcc1) disconnecting link layer
>
>This continued for a few times and then finally connected, but I didn't
>think it would actually 'restart' the M10, only disconnect the link... so
>this suggests that ping flooding it (as from the log this is apparently what
>happened) will get it to restart?!)
>
>
>-----Original Message-----
>From: Kevin Hardie [mailto:kevin@bwpl.co.nz]
>Sent: Monday, 11 September 2000 1:58 PM
>To: Michael Bordignon
>Subject: RE: M10 auto restarting itself?!
>
>
>I would assume looking at the log that the M10/11 has a set time to set up a
>ppp connection to your isp, and if it can't do that then it times out,
>resets itself and starts again. We have had errors on our line that have
>caused the M10 to need to renegotiate a connection. They seemed to start
>with a phy layer down error. Were there any errors further up the log?
>
>Kevin
>
>-----Original Message-----
>From: owner-adsl@unixathome.org [mailto:owner-adsl@unixathome.org]On
>Behalf Of Michael Bordignon
>Sent: Monday, 11 September 2000 12:08
>To: 'David McEwing'; adsl@unixathome.org
>Subject: RE: M10 auto restarting itself?!
>
>
>well ours hasn't... here's the complete log:
>
>46:05:49:43 L3 PPP: (vcc1) restart timer expired
>46:05:49:43 L3 PPP: (vcc1) No config requests or responses received
>from peer during negotiation
>46:05:49:43 L4 PPP: (vcc1) disconnecting link layer
>46:05:49:43 L3 PPP: (vcc1) Port listening for incoming PPP connection
>requests
>46:05:49:44 L3 PPP: (vcc1) Establishing Link on permanent connection
>service
>46:05:50:14 L3 PPP: (vcc1) restart timer expired
>46:05:50:14 L3 PPP: (vcc1) No config requests or responses received
>from peer during negotiation
>46:05:50:14 L4 PPP: (vcc1) disconnecting link layer
>46:05:50:14 L3 PPP: (vcc1) Port listening for incoming PPP connection
>requests
>46:05:50:15 L3 PPP: (vcc1) Establishing Link on permanent connection
>service
>46:05:50:43 L3 PPP: (vcc1) LCP We processed peer's requests:
>46:05:50:43 L3 PPP: (vcc1) max-recv-unit, mru 1500 (ack)
>46:05:50:43 L3 PPP: (vcc1) auth-type, auth (ack)
>46:05:50:45 L3 PPP: (vcc1) restart timer expired
>46:05:50:45 L3 PPP: (vcc1) Unable to reach convergence on LCP options
>46:05:50:45 L4 PPP: (vcc1) disconnecting link layer
>46:05:50:45 L3 PPP: (vcc1) Port listening for incoming PPP connection
>requests
>46:05:50:46 L3 PPP: (vcc1) LCP We processed peer's requests:
>46:05:50:46 L3 PPP: (vcc1) max-recv-unit, mru 1500 (ack)
>46:05:50:46 L3 PPP: (vcc1) auth-type, auth (ack)
>46:05:50:46 L3 PPP: (vcc1) Establishing Link on permanent connection
>service
>46:05:50:46 L3 PPP: (vcc1) LCP Peer acknowledged our requests:
>46:05:50:49 L3 PPP: (vcc1) LCP We processed peer's requests:
>46:05:50:49 L3 PPP: (vcc1) max-recv-unit, mru 1500 (ack)
>46:05:50:49 L3 PPP: (vcc1) auth-type, auth (ack)
>46:05:51:05 L3 PPP: (vcc1) Dropping 8021 pkt, authentication not
>completed.
>46:05:51:06 L3 PPP: (vcc1) Peer reports successful PAP authentication
>46:05:51:06 L3 IPCP: (vcc1) Resettings options: ip (0.0.0.0), dns
>(0.0.0.0, 0.0.0.0)
>46:05:51:07 L3 IPCP: (vcc1) Peer Nak'd our addr (0.0.0.0) with addr
>(210.48.81.xx); accepting peer's address preference
>46:05:51:07 L3 IPCP: (vcc1) Peer Nak'd our primary DNS (0.0.0.0) with
>(210.48.65.2); accepting peer's primary DNS address
>46:05:51:07 L3 IPCP: (vcc1) Peer Nak'd our secondary DNS (0.0.0.0) with
>(210.48.66.2); accepting peer's secondary DNS address
>46:05:51:08 L3 IPCP: (vcc1) IPCP Peer acknowledged our request:
>46:05:51:08 L3 IPCP: (vcc1) IP-Addr: local-addr 210.48.81.xx
>46:05:51:08 L3 IPCP: (vcc1) Primary DNS: 210.48.65.2
>46:05:51:08 L3 IPCP: (vcc1) Secondary DNS: 210.48.66.2
>46:05:51:08 L4 DNS: primary nameserver address is 210.48.65.2
>46:05:51:08 L4 DNS: secondary nameserver address is 210.48.66.2
>46:05:51:09 L3 IPCP: (vcc1) IPCP We acknowledged peer's requests:
>46:05:51:09 L3 IPCP: (vcc1) IP-Addr: peer-addr 210.48.81.xx
>46:05:51:09 L3 IPCP: (vcc1) IP up, local 210.48.81.xx, remote
>210.48.81.xx
>02:15:07:47 L4 TS: User "admin" completed login as user administrator
>02:15:18:12 L4 TS: closing idle http shell (192.168.2.1)
>
>
>-----Original Message-----
>From: David McEwing [mailto:dmcewing@earthling.net]
>Sent: Monday, 11 September 2000 12:10 PM
>To: Michael Bordignon; adsl@unixathome.org
>Subject: RE: M10 auto restarting itself?!
>
>
>Doesn't the log get cleared when the modem is reset?
>
>This message is part of the NZ Broadband mailing list.
>see http://unixathome.org/adsl/ for archives, FAQ,
>and various documents.
>To unsubscribe: send mail to majordomo@unixathome.org
>with "unsubscribe adsl" in the body of the message
>
>
>This message is part of the NZ Broadband mailing list.
>see http://unixathome.org/adsl/ for archives, FAQ,
>and various documents.
>To unsubscribe: send mail to majordomo@unixathome.org
>with "unsubscribe adsl" in the body of the message
>
>

This message is part of the NZ Broadband mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to majordomo@unixathome.org
with "unsubscribe adsl" in the body of the message
Received on Mon Sep 11 14:21:31 2000


This archive was generated by hypermail 2.2.0 : Thu Nov 30 11:48:06 2006 EST