Hi Rob,

Don't know if you solved this problem, but this is how I got it working.

You have to Telnet to the M11 to set up protocol 50 (ESP). Once you have
logged on, go to the configuration menu and then to the pinhole menu.

set pinhole name "whatever you decide to name this entry" protocol-select
OTHER
set pinhole name "whatever you decide to name this entry" numerical-protocol
50
set pinhole name "whatever you decide to name this entry"
external-port-start 0
set pinhole name "whatever you decide to name this entry" external-port-end
0
set pinhole name "whatever you decide to name this entry" internal-ip
address
set pinhole name "whatever you decide to name this entry" internal-port 0

save this and restart the M11

Depending on how you are negotiating your keys, you may also need to
pinhole port 500 for UDP to support IKE.

cheers

Mike Pratt

"VAN GELDER, ROBERT (IT7)" wrote:

> Hi.
>
> Can anyone give me step by step instructions on how to open ESP protocol
> (50) on M11 modem?
>
> Cheers,
> Rob
>
> This message is part of the NZ Broadband mailing list.
> see http://unixathome.org/adsl/ for archives, FAQ,
> and various documents.
> To unsubscribe: send mail to majordomo@unixathome.org
> with "unsubscribe adsl" in the body of the message

This message is part of the NZ Broadband mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to majordomo@unixathome.org
with "unsubscribe adsl" in the body of the message
Received on Mon Sep 18 12:26:59 2000