No SNMP, which is a pity... no more pretty MRTG graphs etc. :-(

Pinholes seem limited too -- no more than seven, which is an even bigger
bummer. I need SMTP, HTTP, HTTPS, DNS, SSH, NTP and LDAP.

The MW11 is much faster though, if the modem stats are to be believed. Got
7.5Mbps/900Kbps now, up from 6-6.5Mbps/600Kbps with the M10.

Admin interface is much improved, and it's nice not having to restart the
MW11 when you change the NAPT entries. If you do restart, however, the
MW1122 takes a lot longer to come up than the M10.

-- 
Regards,
Juha
PGP fingerprint:
B7E1 CC52 5FCA 9756 B502  10C8 4CD8 B066 12F3 9544
On Tue, 3 Oct 2000, Adam Bowden wrote:
> Not Sure if its just me but these are my first impressions of the MW1122
> IMHO
> 
> It does not seem to support SNMP - I cant find a setting. Does not respond
> to the compaq SNMP tool (did work with M10) (not that I know anything about
> SNMP)
> 
> The command prompt mode has dropped the "script" command for creating config
> scripts. It also appears to less configuration settings.
> 
> Can't find settings to change the ports of the internal servers telnet/HTTP.
> 
> Increased our incoming rate by approximately 20% and out going rate by
> approx 50%. Based on what the router reports
> 
> 
> Adam
> Data Freight Ltd
> 
> WEBSITE: http://www.datafreight.co.nz
This message is part of the NZ Broadband mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to majordomo@unixathome.org
with "unsubscribe adsl" in the body of the message