I had a setup working on my M10 where the dsl modem was plugged into a
linux box with two NIC's, one with interface address 192.168.100.1 and
the other NIC 192.168.1.1. The Mw1122 has ip 192.168.100.2

What I used to be able to do was with linux and ipforwarding is forward
traffic from one nic to the other and the M10 would happily send the
packets out the DSL interface.

What the Mw1122 seems to do is disallow all packets not originating from
its own subnet, even pings. I can confirm this because if I masquerade
packets between the two interfaces, so the originating ip appears from
the 100 subnet, it works ok.

Anyone know if this could be a limitation with the dsl modem?

Cheers

Chris Hellberg

This message is part of the NZ Broadband mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to majordomo@unixathome.org
with "unsubscribe adsl" in the body of the message
Received on Wed Oct 4 12:25:55 2000