>If anyone can offer some hints for things for me to try it would be very
>much appreciated :), I am including some excerpts below from the debug file

>SENT PPPOE Discovery (3c12) PADI sess-id 0 length 15
>SourceAddr 00:00:b4:8d:d6:a5 DestAddr ff:ff:ff:ff:ff:ff
>01 01 00 03 49 53 50 01-03 00 04 4a 0d 00 00

>/tmp/pppoe-debug-3343/pppoe-debug.txt-0, pid 3402 pppoe: Timeout waiting
>for PADO packets Hangup (SIGHUP) Script /usr/sbin/pppoe -p

>From the info supplied you appear to be sending the Discovery with the right
protocol but not receiving any (usable) PADO packets back. You have pruned
the log, is there any PADO packets in it?

If you browse to 192.168.157.100 make sure you have a single service named
"ISP" set for PPP mode on 0/100.

The service name in the 3com must match the -S parameter in PPPoE

>script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T
>80 -U -m 1412 -f 3c12:3c13 -S ISP -D

If the two don't match PPPoE would discard the PADO packet and wait for a
PADO packet with the right service name.

This message is part of the NZ ADSL mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to majordomo@unixathome.org
with "unsubscribe adsl" in the body of the message
Received on Fri Mar 9 09:48:04 2001