Brian is the Man,

couldn't wait so popped home during lunchtime:

 -deleted the port that I had set up on the modem
 - made a new one called ISP

add port ISP
set port ISP vpi 00 vci 100 pcr 0
set port ISP net PPP
save all

and then when I tried to connect it went through fine! yippee!

I then set a default route to ppp0 and pinged a few sites out there in the
world and teneted to a
 couple, and it all worked fine

So thank you all for your help, I am now another happy jetstart customer.

Incidently I checked with the email that I got from jetstart support and
they did give me the full login name "username.xadsl@xtra.co.nz", so they
must be on top of that one :)

cheers
Wayne

                                                                                                                                        
                    "Brian
                    Gibbons" To: <adsl@unixathome.org>, "Wayne Munro" <wayne.munro@nbci.com>
                    <brian@outers cc:
                    ite.co.nz> Subject: Re: 3Com Modem and Linux :(
                                                                                                                                        
                    09/03/2001
                    22:43
                                                                                                                                        
                                                                                                                                        

>If anyone can offer some hints for things for me to try it would be very
>much appreciated :), I am including some excerpts below from the debug
file

>SENT PPPOE Discovery (3c12) PADI sess-id 0 length 15
>SourceAddr 00:00:b4:8d:d6:a5 DestAddr ff:ff:ff:ff:ff:ff
>01 01 00 03 49 53 50 01-03 00 04 4a 0d 00 00

>/tmp/pppoe-debug-3343/pppoe-debug.txt-0, pid 3402 pppoe: Timeout waiting
>for PADO packets Hangup (SIGHUP) Script /usr/sbin/pppoe -p

>From the info supplied you appear to be sending the Discovery with the
right
protocol but not receiving any (usable) PADO packets back. You have pruned
the log, is there any PADO packets in it?

If you browse to 192.168.157.100 make sure you have a single service named
"ISP" set for PPP mode on 0/100.

The service name in the 3com must match the -S parameter in PPPoE

>script /usr/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I eth0 -T
>80 -U -m 1412 -f 3c12:3c13 -S ISP -D

If the two don't match PPPoE would discard the PADO packet and wait for a
PADO packet with the right service name.

This message is part of the NZ ADSL mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to majordomo@unixathome.org
with "unsubscribe adsl" in the body of the message
Received on Fri Mar 9 13:00:29 2001