> Your still better off getting the full install.
> As I have said before you can not tell if your line is on a 1 + 1, 0 + 2
> filter or may have impedance balancing coils loaded across it. Using the
> full install these problems are taken care of for you.
> But if you attempt a cheap install and have to call them about one of
these
> type problems it will cost you more than the original full rate install.
> (According to my sources).
> Now if you are in a relatively new subdivision and all the cabling is
> underground you probably could get away with it, but if your cabling is
> overhead, I wouldn't risk it I would use the full install.
> The kicker for new underground subdivisions is that some (south east
> Auckland in particular) have PCM feeds to the subdivision and of course
ADSL
> will not run on PCM or fibre optic, it must be copper all the way.

All the troubles you say above will be looked into when you Ask for DSL to
be installed on your Line and be fixed/changed if needed. So if you are
accepted when the self-installed Filters will work perfectly well.

Thanks
Craig Whitmore
Orcon Internet

This message is part of the NZ ADSL mailing list.
see http://unixathome.org/adsl/ for archives, FAQ,
and various documents.
To unsubscribe: send mail to majordomo@unixathome.org
with "unsubscribe adsl" in the body of the message
Received on Wed Jul 4 11:42:44 2001