I can confirm that the RTA210 has SNMP running by default, I was using MRTG
to look at mine last night, and then walked the whole Agent which is where I
found my username and password as plain text for all the world to see...

I'm not sure (nor am I the most knowledgeable person on IP) but aren't those
just HTTP and TELNET ports, doesn't SNMP run on 161? Wouldn't pin holing
those ports just stop people access the admin interface of the router, what
I'm talking about is the username and password of your ISP account NOT the
admin interface

FYI: on an RTA020/RTA210 querying 1.3.6.1.2.1.10.23.2.3.1.5.2.1 will return
the username

Or may be I've missed your point about the pin holes...

Cheers, Jason

-----Original Message-----
From: Steven Perich [mailto:stevenp@kaon.co.nz]
Sent: Wednesday, July 03, 2002 2:20 PM
To: Jason Walker; ADSL List
Subject: Re: Dynalink SNMP agent?

Hi

They are until you change the password for the default then pinhole port 23
and 80 to internal non-existant IP addresses. As for SNMP on the RTA210?
Until I get some kind of response out of Dynalink, I think I'll just assume
it's vapourware.

Steve

----- Original Message -----
From: "Jason Walker" <jason@dmd.co.nz>
To: "ADSL List" <adsl@lists.unixathome.org>
Sent: Wednesday, July 03, 2002 11:00 AM
Subject: RE: Dynalink SNMP agent?

> Use SNMP with caution, on a Dynalink RTA020 or RTA210 the username and
> password are accessible as plain text...
>
> Jason
>
> -----Original Message-----
> From: owner-adsl@unixathome.org [mailto:owner-adsl@unixathome.org]On
> Behalf Of David Mill
> Sent: Tuesday, July 02, 2002 5:54 PM
> To: adsl@lists.unixathome.org
> Subject: Re: Dynalink SNMP agent?
>
>
> Spured on by the original post I went about and set-up SNMP and MRTG on my
> home network. Im using a Dynalink RTA020 and it works perfectly. If any
one
> wants step by step instructions of what I did then drop me a mail.
>
> Dave
>
>
> ----- Original Message -----
> From: "Michael Jager" <mjager@mac.com>
> To: "adsl" <adsl@lists.unixathome.org>
> Sent: Monday, July 01, 2002 10:31 PM
> Subject: Re: Dynalink SNMP agent?
>
>
> > claiming to be Steven Perich, <steve@clubpoint.co.nz> said:
> >
> > > Just tried the recommended commands to set up the SNMP communities on
my
> > > RTA210.. No luck.
> >
> > Damn. From memory, my 020 has the public thing in there before I reset
it
> :P
> >
> > Michael
> >
> > --
> > This message is part of the NZ ADSL mailing list.
> > see http://unixathome.org/adsl/ for archives, FAQ,
> > and various documents.
> > To unsubscribe: send mail to majordomo@lists.unixathome.org
> > with "unsubscribe adsl" in the body of the message
> >
> >
>
> --
> This message is part of the NZ ADSL mailing list.
> see http://unixathome.org/adsl/ for archives, FAQ,
> and various documents.
> To unsubscribe: send mail to majordomo@lists.unixathome.org
> with "unsubscribe adsl" in the body of the message
>
>
> --
> This message is part of the NZ ADSL mailing list.
> see http://unixathome.org/adsl/ for archives, FAQ,
> and various documents.
> To unsubscribe: send mail to majordomo@lists.unixathome.org
> with "unsubscribe adsl" in the body of the message
>
>

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message