Hi everyone

Thanks for people's help guiding me to setting up SNMP on the RTA210. I
thought I'ld share with all a final intelligent comment on this topic from
Kevin Yu, broadband manager at Askey:

Steven
Regarding your question our R&D Manager for Broadband router has responded:
>>>>
  Please configure your SNMP manager (win application) to run with
  the read/write community to be "public"/"private" in order to
  access RTA210 through SNMP.

  I am pretty sorry to provide you the terrible manual for RTA210.
  We will try to improve the quality of the user manual from the
  new models (RTA220, RTA040, and RTA300).

  // BR, Kevin Yu, Askey
<<<<

'nuff said.

Steve

----- Original Message -----
From: "David Mill" <maildave@inspire.net.nz>
To: <adsl@lists.unixathome.org>
Sent: Friday, July 05, 2002 9:19 AM
Subject: Dynalink RTA020

> Most peoples queries I think have been answered by now, but here is a cut
> down history from my telnet sessions and bash_history files. Should help
> people get MRTG and SNMP on the Dynalink configured.
>
> This was done a debian machine, which is a mix between sid and
experimental.
> Should work fairly similar on any linux machine tho. Heaps of help is also
> available on
> http://people.ee.ethz.ch/~oetiker/webtools/mrtg/unix-guide.html.
>
>
> hax0r:/home/term# telnet 192.168.0.1
> Trying 192.168.0.1...
> Connected to 192.168.0.1.
> Escape character is '^]'.
> password:
> logged on; type `@close' to close connection.
> 00:90:96:19:08:E4 nat> home
> 00:90:96:19:08:E4> ip
> 00:90:96:19:08:E4 ip> snmp
>
> Commands are:
>
> ? access config help
> trap version
>
> '.' repeats the last command
> Type "snmp help all" or "snmp help <command>" for more details
>
> <---
>
> This stuff is the important part. Basically it means the Dynalink is
> accesible using public@ip.address. This also may cause various security
> issues. Need to look into this
>
> ----->
>
> 00:90:96:19:08:E4 ip> snmp access
> access read public
> access write private
>
> <--- This next bit is just help - might be useful ----->
>
>
> 00:90:96:19:08:E4 ip> snmp access help
> Syntax:
> snmp access [read | write] <community> [<IP addr>]
> - allow read-only or read-write access
> snmp access delete <community> [<IP addr>]
> - revoke specified access
> snmp access flush
> - revoke all access
> snmp access list - list allowed access
>
>
> Now I get along to sorting out MRTG, most of this is just extracts from
> bash_history along with comments.
>
>
> wget http://freshmeat.net/redir/gd/3111/url_tgz/gd-1.8.4.tar.gz
> tar xfz gd-1.8.4.tar.gz
> wget http://www.gzip.org/zlib/zlib-1.1.4.tar.gz
> wget
http://belnet.dl.sourceforge.net/sourceforge/libpng/libpng-1.2.3.tar.gz
> tar xfz libpng-1.2.3.tar.gz
> cd libpng-1.2.3
> cp scripts/makefile.linux .
> cp makefile.linux Makefile
> make
> make install
> cd ..
> tar xfz zlib-1.1.4.tar.gz
> cd zlib-1.1.4
> ./configure
> make ; make install
> cd ..
> <--- i got bored about here and decided to rely on apt a bit
> apt-get install libjpeg62
> apt-get install libjpeg62-dev
> cd gd-1.8.4
> make
> make install
> cd ..
> wget
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/pub/mrtg-2.9.18.tar.gz
> tar xfz mrtg-2.9.18.tar.gz
> cd mrtg-2.9.18
> ./configure
> make
> make install
> mkdir /usr/local/apache/htdocs/mrtg
> /usr/local/mrtg-2/bin/cfgmaker --global 'WorkDir:
> /usr/local/apache/htdocs/mrtg' --global 'Options[_]:
> bits,growright'
> --output /etc/mrtg.cfg public@192.168.0.1
> cd /usr/local/apache/htdocs/mrtg/
> /usr/local/mrtg-2/bin/mrtg /etc/mrtg.cfg
> ls -la
>
> Everything should be sussed now. After here you probably want to tweak
> MRTG's config so that it just shows interface 2 and possibly 18 on the
> Dynalink. I normally changes bits to bytes as well (just remove the entry
> regarding kbits)
>
> If anyone tries this on a 210 let me know if it works.
>
>
> Regards,
>
> David Mill
>
>
>
> --
> This message is part of the NZ ADSL mailing list.
> see http://unixathome.org/adsl/ for archives, FAQ,
> and various documents.
> To unsubscribe: send mail to majordomo@lists.unixathome.org
> with "unsubscribe adsl" in the body of the message
>
>

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message