Hi Guys. My first post. I've had Jetstart up now for 10 days. Don't
know why I didn't do it earlier.
 
Re household line loads. As far as I know you are allowed up to 5
loads on a normal phone line. Whether this changes after a filter
and with an ADSL modem attached I don't know. Some devices use less
than a load, maybe .5 so you might be able to fit more.
 
When I had mine connected I tried a Dynalink with a Nokia filter but
the ADSL light didn't even come on. I am 5.7km from the exchange so
I thought that I was done for. Got Telecom to come in and do a line
check. They fitted their splitter at the demarcation point, put on
their M1122 and we were in business (max speed is only 250-500kb but
this is enough for my Jetstart at 128kb). I managed to source a
M1122 of my own and have been fine ever since. However I only have
one phone load after the filter. Everything else in the house
(several phones and fax machines) run into a mini exchange and this
connects to the filter. Thus no issues with loading. If you do have
this problem then you might like to consider this as a possible
solution.
 
Regards
Chris Calvert
627 Springs Road
Prebbleton
Christchurch, New Zealand
Ph +64 3349 8182
Fax +64 3349 0193
Cell +64 25 88 22 55

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message