To check the port issues, you may want to temporarily open all the ports near enough and see what happens. if nogo, it is another issue than ports. I use TCP and UDP starting at port 1000 and forwarding 65000 ports.

-----Original Message-----
From: Barry Parr [mailto:bazza@bbbits.co.nz]
Sent: Tuesday, 23 July 2002 02:10
To: adsl@lists.unixathome.org
Subject: M1122 UDP port Problem With Rave2

Hi Folks
I've been going Nuts trying to get Rave2 (a small Iphone App) running behind
the M1122.
I thought It was Just a case of opening up 2 UDP ports 2078,2079 and away
it would go.
This was the case when I had another computor with an Internal adsl modem
using Winroute for NAT .
The Configuration of the w2k Box on my Lan running Rave Hasn't changed.
Nokia release .. Gx1x2230.R04

As it Stands, The Nokia Rave setup is ...
Names : "RaveUDP" 2078 2079 UDP

NAPT : "RaveUDP" 192.168.0.2 blank blank (All Connections (Global))

FireWall : "RaveUDP " 192.168.0.2 blank

I have experimented with Heaps of settings.
This is the Minimum to get communications happening in at Least 1
Direction.

Any Ideas as to where I'm going wrong would be greatly appreciated.

Regards
Barry

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message 
 
------------------------------------------------------------------------------
"This communication, including any attachments, is confidential. 
If you are not the intended recipient, you should not read
it - please contact me immediately, destroy it, and do not
copy or use any part of this communication or disclose
anything about it. Thank you."
------------------------------------------------------------------------------
-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message