Nah, number of ports = 65535/6 is the old instructions. But setting
number of ports to one did work (thanks to the off-list person who gave
me the tip - honest I thought I had tried that!

For reference the correct settings were:

entryname pptp-gre
 internal address 192.168.1.20
 start port int 0
 start port ext 0
 number of ports 1
 protocol pptp-gre

Version info:

SW boot version: Bxxxx110.R01
SW appl. version: Gx1x2230.R04
HW version: T66280.01 C
Serial number: 61004622132

Nick
> Did you try using the protocol number for GRE instead of pptp-gre? The
> protocol number is 47 I think. Also, try setting the number of ports to
> 65535.
>
> --
> Regan Murphy.
>
>
> -----Original Message-----
> From: Nick Rout [mailto:nick@rout.co.nz]
> Sent: Wednesday, 21 August 2002 9:56 p.m.
> To: adsl
> Subject: *sigh* gre on m1122
>
>
> I just tried pptp'ing into my office network after a recent nokia
> update. They didn't appear to have set gre forwarding (although port
> 1723 tcp seems to have survived)
>
> I try and set it from the web interface with
>
> entryname pptp-gre
> internal address 192.168.1.20
> start port int 0
> start port ext 0
> number of ports 0
> protocol pptp-gre
>
> and it won't do it, a little error message comes up "eroors found, no
> changes were activated"
>
> If I try and do it from telnet, it tells me:
>
> M1122(conf-vcc1)#ip server-napt PPTP-2 192.168.1.20 0 0 0 pptp-gre fail
> on request
>
> What to do next?
> --
> Nick Rout <nick@rout.co.nz>
>

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message