Robert,

Using the Checkpoint Secure remote client does work through a Nokia M1122 as
I have set this up for someone.

The pinhole settings below are correct

Limitations - only 1 device behind a M1122 can NAT through at any one time

There are some settings that need to be set on the Client (like IKE UDP
Encapsulation) and also some configuration on the FW itself.

Check out

http://www.phoneboy.com or more specifically
http://www.phoneboy.com/fom-serve/cache/89.html

Sorry I cannot be more specific as it was a while back that I did this (but
I know it is still working)

Cheers

Jason

----- Original Message -----
From: "Robert Hamilton" <robert.hamilton@imagenet.co.nz>
To: <adsl@lists.unixathome.org>
Sent: Thursday, January 09, 2003 12:12 PM
Subject: Checkpoint Secure remote and M1122

> Hi
>
> I have seen a lot of posts in the archives of people trying to get this to
work .. But no success storys . Is it possible ?
>
> The right track ?
>
> Address (internal) port (internal) port (external) no pts Protocol
>
> 192.168.1.20 - 50 - 50 - 1 - ESP-IPSEC
>
> 192.168.1.20 - 2746 - 2746 - 1- UDP
>
> 192.168.1.20 - 500 - 500 - 1 - UDP
>
> Cheers
>
> Robert
>
>
> --
> This message is part of the NZ ADSL mailing list.
> see http://unixathome.org/adsl/ for archives, FAQ,
> and various documents.
> To unsubscribe: send mail to majordomo@lists.unixathome.org
> with "unsubscribe adsl" in the body of the message
>

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message