Mark

If the burglar alarm is causing a problem then I believe the ADSL
filter has been wired up wrong with the alarm being set-up on the
wrong side of the filter

The easy test for this is when the alarm is set / reset and the ADSL
gets knocked off then you will know the wiring up is wrong

Cheers

Brian

----- Original Message -----
From: "Mark Foster" <blakjak@blakjak.net>
To: "Geoff Olliff" <geoff@quik.co.nz>
Cc: <adsl@lists.unixathome.org>
Sent: 10 June 2003 11:02 a.m.
Subject: Re: Replacement for Alcatel Speed touch

> My DLink DSL500 performed fine even where my connect rate was
fluctuating
> between 1.2mbit and 1.8mbit (Telecom want you to have 2mbit before
theyll
> even guaruntee DSL will work)...
>
> The problem was eventually attributed to my flatmates burglar alarm
system..
>
> Ive not yet heard bad things about their signal situation although
theres
> the ASAM compatibility issue to be slightly concerned about; There
are
> fixes available. I still consider them good value.
>

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message