Thanks Brian, the problem has well and truly been solved. Thanks though.

At 12:46 10/06/2003 +1200, ccsltd wrote:
>Mark
>
>If the burglar alarm is causing a problem then I believe the ADSL
>filter has been wired up wrong with the alarm being set-up on the
>wrong side of the filter
>
>The easy test for this is when the alarm is set / reset and the ADSL
>gets knocked off then you will know the wiring up is wrong
>
>Cheers
>
>Brian
>
>
>----- Original Message -----
>From: "Mark Foster" <blakjak@blakjak.net>
>To: "Geoff Olliff" <geoff@quik.co.nz>
>Cc: <adsl@lists.unixathome.org>
>Sent: 10 June 2003 11:02 a.m.
>Subject: Re: Replacement for Alcatel Speed touch
>
>
> > My DLink DSL500 performed fine even where my connect rate was
>fluctuating
> > between 1.2mbit and 1.8mbit (Telecom want you to have 2mbit before
>theyll
> > even guaruntee DSL will work)...
> >
> > The problem was eventually attributed to my flatmates burglar alarm
>system..
> >
> > Ive not yet heard bad things about their signal situation although
>theres
> > the ASAM compatibility issue to be slightly concerned about; There
>are
> > fixes available. I still consider them good value.
> >

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message