At 11:47 27/01/2004, you wrote:
>I am trying to configure a Speedtouch and a Sonicwall for bridged
>ethernet and PPPoE so that the Sonicwall has the external IP address
>assigned to it.
>
>I am using ADSL from Clear Net which uses PPPoE to connect and assign IP
>address (G.dmt; VPI=0; VCI=100; Framing=LLC/SNAP; PAP)
>
>The Speedtouch I have configured in Bridged Ethernet mode.
>
>The Sonicwall I have configured in NAT with PPPoE mode and supplied the
>Clear Net user/pass.
>
>I cannot get this to work and am not sure what I have done wrong (I am
>not familiar with the Speedtouch).
>
>I also tried using the Speedtouch with an XP client and the PPPoE wizard
>in XP and could not get this to work either.
>
>I assume that I have set up the Speedtouch incorrectly - can anyone shed
>any light on this?

Don't use this or any DSL in NZ. But a few questions. Is your router (and the XP client) actually connecting? If it is connecting but is you are unable to send or receive data it's a diff matter from if your router (and XP client) is not connecting at all.

Anyway from this page http://www.clear.net.nz/help/technical.html#adslconfig, I would suggest you try VC/MUX instead of LLC and see if that helps. It's not really clear what they recommend you use for router style configs other then PPPOE.

Also, make sure you have set up the Speedtouch to (full) bridge not half bridge mode.

-- 
This message is part of the NZ ADSL mailing list. 
see http://unixathome.org/adsl/ for archives, FAQ, 
and various documents. 
To unsubscribe: send mail to majordomo@lists.unixathome.org 
with "unsubscribe adsl" in the body of the message